$300/day

ENGINE

Gross Power – SAE J1995	67.1 HP
Net Power – SAE 1349	65.8 HP
Displacement	134.3 in³
Stroke	3.9 in
Bore	3.3 in
Engine Model	Cat C2.2 CRDI
Peak Torque – 1,500 rpm – SAE J1995	153 ft·lbf
Net Power – ISO 9249	66.5 HP

OPERATING SPECIFICATIONS

Rated Operating Capacity	1550 lb
Rated Operating Capacity with Optional Counterweight	1650 lb
Tipping Load	3100 lb
Breakout Force – Tilt Cylinder	3927 lb
Note	* Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).

WEIGHTS

Operating Weight	5849 lb
Note	* Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).

DIMENSIONS

Wheel Base	41.5 in
Length – With Bucket on Ground	127.3 in
Length – Without Bucket	99.4 in
Height – Top of Cab	79.8 in
Vehicle Width over Tires	58.9 in
Maximum Overall Height	143.8 in
Bucket Pin Height – Maximum Lift	110.9 in
Bucket Pin Height – Carry Position	8.5 in
Reach – Maximum Lift/Dump	21 in
Clearance at Maximum Lift and Dump	81.8 in
Ground Clearance	6.9 in
Departure Angle	27.9°
Maximum Dump Angle	46.7°
Rack Back Angle – Maximum Height	88.9°
Bumper Overhang – Behind Rear Axle	35.2 in
Turning Radius from Center – Bucket	77.8 in
Maximum Reach – With Arms Parallel to Ground	50.7 in
Turning Radius from Center – Machine Rear	59.6 in
Turning Radius from Center – Coupler	43.5 in
Note	* Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).

HYDRAULIC SYSTEM

Hydraulic Flow – Standard – Loader Hydraulic Pressure	3336 psi
Hydraulic Flow – High Flow – Maximum Loader Hydraulic Pressure	3336 psi
Hydraulic Flow – Standard – Hydraulic Power (Calculated)	33.5 HP
Hydraulic Flow – High Flow – Hydraulic Power (Calculated)	50.9 HP
Hydraulic Flow – Standard – Loader Hydraulic Flow	18 gal/min
Hydraulic Flow – High Flow – Maximum Loader Hydraulic Flow	26 gal/min

CAB

ROPS	ISO 3471:2008
FOPS	ISO 3449:2005 Level I

POWER TRAIN

Travel Speed – Forward or Reverse – One Speed	7.6 mile/h
Travel Speed – Forward or Reverse – Two Speed Option	11.1 mile/h

SERVICE REFILL CAPACITIES

Chain Box – Each Side	1.8 gal (US)
Cooling System	3.2 gal (US)
Engine Crankcase	2.6 gal (US)
Fuel Tank	15.1 gal (US)
Hydraulic System	11.9 gal (US)
Hydraulic Tank	9 gal (US)

AIR CONDITIONING SYSTEM (IF EQUIPPED)

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.

NOISE LEVEL

Outside Cab***	102 dB(A)
Inside Cab**	83 dB(A)
Note (3)	***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Note (1)	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)	**The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.