TL6R

$300/day

Call 719.239.8221 to book!

OPERATING PERFORMANCE
Operating Weight – Canopy 7,485 lb (3,395 kg)
Operating Weight – Cab 7,780 lb (3,530 kg)
Tipping Load 5,269 lb (2,390 kg)
Rated Operating Capacity, SAE J818* 1,841 lb (835 kg)
Operating Load at 50% of Tipping Load 2,635 lb (1,195 kg)
Bucket Breakout Force 5,930 lb (2,690 kg)
Lift Arm Breakout Force 4,860 lb (2,205 kg)
Traction Force 8,655 lb (3,926 kg)
Ground Pressure – 12.6″ Track 5.1 psi (34.8 kPa)
Travel Speed – Low 4.3 mph (7.0 km/hr)
Travel Speed – High 6.2 mph (10.0 km/hr)
*Rated operating capacity of track loaders is rated according to SAE J818 at no more than 35% of the tipping load.
HYDRAULIC SYSTEM
Auxiliary Flow – Primary Circuit 17.8 gpm (67.4 Lpm)
Hydraulic System Pressure 2,988 psi (20.6 MPa)
ENGINE
Make / Model Kubota / V2403-CR-TE4B
Engine Displacement 148.5 cu in (2.4 L)
Horsepower @ 2,700 rpm 65.2 hp (48.6 kW)
Maximum Torque @ 1,500 rpm 144.3 ft-lb (195.6 Nm)
FLUID CAPACITIES
Engine Lubrication 7.6 qt (7.2 L)
Cooling System 14.0 qt (13.0 L)
Fuel Tank Capacity 20.0 gal (75.7 L)
Fuel Consumption (65% of Full Load) 2.69 gal/hr (10.2 L /hr)
Hydraulic Reservoir Capacity 7.9 gal (30.0 L)
Hydraulic System Capacity 13.5 gal (51.0 L)
MACHINE DIMENSIONS
Max. Lift Height to Bucket Pin 9 ft 6.4 in (2,905 mm)
Dump Height Fully Raised 7 ft 5.6 in (2,275 mm)
Dump Reach Fully Raised 1 ft 10.0 in (560 mm)
Dump Angle 38°
Rollback Angle 31°
Track Ground Contact Length 4 ft 6.9 in (1,395 mm)
Machine Length 8 ft 9.9 in (2,689 mm)
Transport Length 10 ft 11.1 in (3,330 mm)
Transport Height 6 ft 5.8 in (1,975 mm)
Departure Angle 30°
Clearance Circle with Bucket 6 ft 10.5 in (2,095 mm)
Clearance Circle without Bucket 4 ft 6.9 in (1,395 mm)
Clearance Circle Rear 4 ft 11.8 in (1,520 mm)
Track Width 12.6 in (320 mm)
Ground Clearance 9.1 in (230 mm)
Overall Width without Bucket 5 ft 0.2 in (1,530 mm)